New Ability Energy
01
LED upgrades to code
Delivered by our own licensed in-house electricians, under the same contract as everything else we hold on the site.
Everyday site electrical · 06 of 08
LED & Energy Efficiency
LED upgrades surveyed against the standard after dark, so the saving is a measurement rather than a claim from a catalogue.
The problem
Lighting is the cheapest load to remove from a site, and the one most often left in place because nobody has counted what it costs to run.
LED upgrades, emergency lighting and rewiring for warehouses and offices, done to code. Lighting is usually the cheapest load to remove from a site and the easiest to measure afterwards, which is why it often goes first.
What the scope covers.
02
Emergency and exit lighting
Delivered by our own licensed in-house electricians, under the same contract as everything else we hold on the site.
03
Warehouse, office and outdoor sports
Delivered by our own licensed in-house electricians, under the same contract as everything else we hold on the site.
04
Rewiring and circuit work
Delivered by our own licensed in-house electricians, under the same contract as everything else we hold on the site.
What it usually looks like
Typical range on a commercial site.
Every site is sized from its own interval data and tariff, so treat these as the shape of a scope rather than a quote. Yours is established at the visit.
Typical range on a commercial site
50 – 70%
Energy saving against metal halide
2 – 4yrs
Simple payback
5yrs
Typical fitting warranty
1
After-dark survey to the standard
Indicative ranges for scoping only, not measurements from a specific job.
How it runs, start to finish.
Four stages, one accountable team, and a window agreed in writing before anyone arrives.
01
SiteIt starts with a bill and a visit.
A recent electricity bill, access to your interval data, and a site visit. From that we model your load, check the switchboard and the roof or ground area, and write the assumptions up with the proposal.
- Interval data requested
- Site visit
- Technicals checked
02
DesignPerfectly matched to your requirements.
We model your load shape, check network export limits and switchboard capacity, and size the array and inverters to what the site actually uses. Where a battery earns its keep, it is modelled the same way before a kWh figure is put on paper.
- Load modelled
- Export limits checked
- Fixed-price proposal
03
InstallOur own CEC and SAA licensed electricians.
The team that designs the system is the team that commissions it. Shutdowns are planned around your operating hours and the window is confirmed in writing before we start.
- In-house crews
- Shutdown window agreed
- Structural and electrical works
04
CommissionedSigned off, monitored, and still ours.
Monitoring runs from day one. You receive the commissioning documents and warranties, a servicing schedule is agreed, and performance is checked against the model. Faults are flagged from the data.
- Commissioning documents
- Warranties issued
- Monitoring live
What partnering with us actually gets you.
Four differences you can check against any other quote you are holding, rather than four adjectives.
01
Sized to the site, not to a package
Every home and business has different needs. We size a system against your actual load and tariff rather than fitting you to a package off a price list.
02
Electricians, start to finish
The people who specify your system are the people who install it. Our own licensed team holds the job from design through commissioning, so nothing changes hands halfway through.
03
Current on the plant
Solar, storage and charging move quickly, and the standards around them move with it. We stay current on what we specify, which sometimes means recommending something other than what we fitted last year.
04
Transparent pricing
No hidden fees and no unexpected charges. Scope and price in writing before anyone starts, and anything that changes on site is raised and re-quoted rather than absorbed quietly.
Before you ask us.
What does a site visit involve?
A recent electricity bill, access to your interval data, and a site visit. From that we model your load, check the switchboard and the roof or ground area, and write the assumptions up with the proposal.
Can you work around a live site?
Yes. The team that designs the system is the team that commissions it, and shutdowns are planned around your operating hours. The window is confirmed in writing before we start.
What happens after commissioning?
Monitoring runs from day one. You receive the commissioning documents and warranties, a servicing schedule is agreed, and performance is checked against the model. Faults are flagged from the data rather than from a bill shock three months later.
Who actually does the installation?
Our own licensed in-house electricians and installation crews. The people who specify your system are the people who install it, the job is held under one contract, and the warranty is held here.
Tell us where the site is.
A recent bill, your interval data, and a visit. We come back with a fixed-price proposal and the assumptions written next to it.
4.8 out of 5, from 100 Google reviews · 30+ licensed electricians and SAA accredited installers on our own books